Filter
Top Products
10
Emergency Disarm Procedure
If your remote control is lost or fails to function, use this procedure to
disarm the PowerCode PC 7400
TM
and start your vehicle.
1.Use the keys to enter the vehicle.
2.Insert the key into the ignition and turn to the ON position.
3.Locate and press the emergency override button.
The Starter Disable will turn off and then you will be able to
start your vehicle.
Your Emergency Disarm Button is located:
Installer Programmed Options
Ignition On Door Lock ON OFF
Ignition Off Door Unlock ON OFF
Illuminated Entry/Exit ON OFF
Siren/Horn Chirps ON OFF
Car start Run Time 12 min. 25 min.
Car Start Button Single button 2-button start
Light/AUX1 Output Duration _____________________
Defrost/AUX2 Output Duration _____________________
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including any interference that
may cause undesired operation.
Warning!
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.