Filter
Top Products
4. Attach power cord to MDU.
Use power cord clips to
route to fuse box or
lighter/accessory outlet,
depending on the selected
power cord. Surfaces must
be clean and free of dirt,
oil and dust. Plug in the
power cord.
Nothing Comes Close to a Cobra
®
9
InstallationInstallation
8
English
1. Loosen MDU bracket
adjust knob (gray).
2. Adjust module to a position
parallel to the road.
3. Tighten knob to set
proper horizontal detection
position. The MDU
mounting bracket has
two detent positions:
• one for detection
operation (horizontal
position)
• one for storage or
concealment (up
position). Makes MDU
less visible from outside.
IMPORTANT: MDU
will not provide any
radar/laser detection
in “Stored/Concealed”
position.
YourDetectorYourDetector
Internal View
Not In Use.
Stored/Concealed
Position.
Detection
Position
Lower to
Operating
Detection
Position.
Bracket
Adjust Knob
Loosen
Tighten
1
2
3