Cobra Electronics XRS R10G Radar Detector User Manual


 
Installation
YourDetector
Nothing Comes Close to a Cobra
®
7
Installation Overview
6
English
1. Position MDU before actual
mount.
Do not attempt to adjust
MDU bracket.
Hold unit in place.
Using non-permanent
pen, mark two opposite
corners.
2. Peel off film from two-piece
fastener strips. Align with
two corner markings made
in step 1. Press MDU
bracket against windshield.
Fastener strips cannot
easily be removed.
Strength of adhesive
strips increases with
time.
Do not pull on MDU for
first 20 minutes.
Main Detector Unit (MDU)
Global Positioning System Locator – (XRS R10G Model Only)
Mount the GPS Locator module to the MDU by plugging it into the USB port.
Figure E – Internal View
Introduction