Filter
Top Products
Standard Features of the Sabre II
(cont.)
✔ Patented Remote Control Code Learning — A few flicks of a switch lets you
match to the system up to 4 different 3-channel and/or ACG 12-channel remote controls.
Just as easily, a lost or stolen remote control can be deleted from the system memory.
✔ Patented Smart AutoTesting™— Tests all triggers and sensors every time you arm
and warns you if you accidentally arm the system with the hood or trunk open. If
there is a genuine trigger or sensor malfunction, the system will specifically identify
the problem, thereby eliminating time-consuming and costly trouble-shooting.
✔ Patented Malfunction AutoBypass™ —In the unlikely event of a trigger or
sensor malfunction, your Sabre II will automatically bypass the malfunction and arm
all other points to continue relentless protection of your vehicle.
✔
TotalRecall™— Sabre II’s memory stores the identity of the last trigger or sensor
activated. This provides an invaluable diagnostic means, since, whenever you wish,
the system will visually identify the last activated trigger or sensor.
✔ Patented Smart Prior Intrusion Attempt Alert — When you disarm your Sabre II,
a special chirp and parking light flash sequence will audibly and visually alert you
from a distance if an intrusion attempt was foiled while you were away. Your Sabre II
will even identify the specific trigger or sensor that detected the intrusion attempt.
✔ Advanced CMOS Microcomputer —Very large scale integration (VLSI)
microprocessor commands and monitors all system functions, yet it draws less power
than the vehicle’s clock, so it won’t deplete your car battery like other alarms.
✔ Selectable Starter/Ignition Interrupt— You may choose either a fault-proof
mode, which lets you start the engine even in the unlikely event of a system
malfunction, or ultra-secure mode that ensures a thief won’t be able to start the
vehicle even if he finds the system control unit and disconnects it!
✔
Hood/Trunk Trigger Input— For full perimeter protection of the engine
compartment and trunk contents (may require optional pin switches).
✔ High-Luminescence LED Status Indicator — Adds visual deterrence and
identifies system and doorlock status.
✔ Patented SmartPowerUp™ II — When power to the system is disconnected, the
system’s non-volatile memory always remembers the last state (armed, disarmed or
valet mode) and returns to that state when power is restored. So if a thief disconnects
the power and then restores it in an attempt to start the car, the system will re-arm
and instantly sound the siren while immobilizing the vehicle.
4