Clifford Sabre II Automobile Alarm User Manual


 
Standard Features of the Sabre II
(cont.)
Remote Door Lock/Unlock CapabilityNo more fumbling with keys in the dark
or bad weather! A press of a button on the remote control simultaneously arms your
system
and
locks your vehicle’s power locks. Another press disarms and unlocks
(some vehicles require optional relays).
Deluxe Remote Keyless Entry in Valet Mode — Use the remote to lock and
unlock the car doors and remotely activate system accessories even in valet mode.
High-Output Insignia Siren — A loud yet compact siren designed exclusively by
Clifford Electronics for far superior performance, features, reliability and even
aesthetics to all other manufacturer’s look-alike, sound-alike sirens.
Ultra-Reliability — Since sirens are installed in the engine compartment, they’re
continually exposed to an unforgiving environment of extreme temperatures,
vibrations, dirt, dust and water, which may cause the siren’s electronics to fail.
But the entire electronic circuitry of the Sabre II siren and all of its components
have been designed into the underdash control unit. Consequently, the electronic
circuitry is sheltered from the harsh environment and is no longer the weakest link
of the alarm system. In fact, the calculated mean time between failure (MTBF) of
the Insignia Siren is 10 times better than that of conventional sirens.
Patented Automatic Noise Abatement —Sabre II siren electronics limit alarm
sounding to no more than 3 minutes even if a door is left open in the wake of an
intrusion attempt. This ensures against battery drain or towing of your vehicle due
to noise pollution. The system then automatically resets and re-arms all other
points to provide the utmost possible protection.
Piezo Sensor™— An all-electronic, solid-state vibration/impact sensor that delivers
the utmost reliability and provides more accurate discrimination between genuine
intrusion attempts and non-threatening conditions (like a large truck passing by) that
cause other sensors to false alarm.
Enhanced User-Selectable AutoArming™— Automatically arms itself
“passively” if you forget. May qualify you for an insurance discount that could pay
for the system (consult your insurance company).
AutoArming Enable/Disable — You may disable or re-enable AutoArming with
just a few flicks of a switch.
AutoArm & Lock™ — You may set the system to automatically lock the doors
every time the system AutoArms.
Visual Indication — Two parking lights flashes signal that the 30-second
countdown to AutoArming has started.
Instant AutoArm Bypass — Just a quick turn of the ignition switch will bypass
AutoArming for one cycle — perfect when fueling the vehicle. AutoArming is
automatically restored the next time you park your vehicle.
3