Clifford Falcon II Automobile Alarm User Manual


 
Your Premier 4-Button/12-Channel Remote Controls
The Premier 4-button/12-channel remote controls are miniature radio transmitters.
Obstructions, interference or a weak remote control battery will reduce the range. Your
remote control is the key to your Falcon II. You will use it to arm or disarm the system,
lock or unlock the doors, activate its panic feature or control options such as a remote
boot release or IntelliStart remote engine starter. With the red side switch in the UP
position, buttons I-IV transmit channels 1-4; in the DOWN position, they transmit
channels 5-8. If you simultaneously press both buttons II and IV (regardless of the
side switch position), buttons I-IV transmit channels 9-12. These additional channels
can be used to control Falcon II systems and accessories on your other vehicle(s).
TO ARM
THE SYSTEM . . . . . . .
Press button I once. You will hear two chirps and the indicator
lights will flash twice. The dashboard LED will flash
repeatedly and the car doors will automatically lock.
TO DISARM
THE SYSTEM . . . . . . .
Press button I again. One chirp and one indicator light flash
confirms disarming. In addition, the doors will automatically
unlock and the interior lights will turn on and stay on for 30
seconds or until you start the engine, whichever occurs first.
TO SILENTLY
ARM OR DISARM
THE SYSTEM . . . . . . .
Press button III. Your Falcon II system will arm or disarm
with all the indications noted above
except
for the chirp
acknowledgments.
TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button I for 3 seconds. The indicator lights will flash
repeatedly and the siren will blare for 30 seconds or until you
press button I again. If the ignition is on (indicating you are in
the car), the doors will automatically lock to prevent an
assailant from entering. If the ignition is off, the doors unlock,
letting you enter immediately without fumbling with your keys.
TO REMOTELY
OPEN THE BOOT. . . .
Button II can control an optional remote boot release if the
system is disarmed. This ensures that you can’t accidentally
false-alarm the system while it’s armed.
TO ACTIVATE
OTHER OPTIONS. . . . .
Button IV (channel 4) can activate another accessory such as
the IntelliStart remote engine starter, etc.
TO CONTROL
OTHER VEHICLES . . . .
Channels 6–12 can operate Falcon II systems and accessories
on your other vehicles.
6