Filter
Top Products
Selectable starter/ignition interrupt
At the time of installation, you can select whether Falcon II interrupts the starter or
ignition line. In addition, the interrupt will be set in either Fault-Proof mode, which
lets you start the engine even in the unlikely event of a complete system failure, or
Super-Security mode that ensures a thief won’t be able to start the engine even if he
cuts all the wires or finds the system control unit and disconnects it. Changing the
mode requires a minor relay wiring change and installer-only programming. Your
local Authorised Clifford Dealer can make the changes for you.
AutoLock/AutoUnLock
For your safety and that of your passengers, all the vehicle doors will automatically
lock the instant you turn on the ignition to start the engine. When you switch off the
ignition to shut down the engine, the AutoUnLock feature automatically unlocks the
doors. To suit your preferences, the AutoLock/AutoUnLock feature can be disabled
or re-enabled (see User-selectable features on pages 13-14).
SmartPowerUp II
If power to your Falcon II system is ever removed, SmartPowerUp II ensures the
system will automatically restore itself to its previous state when power is restored.
So if a thief disconnects the power and then restores it in an attempt to start the car,
the system will re-arm and instantly sound the siren while immobilising the vehicle.
If your vehicle is to be serviced by a mechanic, just put the system in valet mode via
the remote control (see Remote controlled valet mode entry and exit on page 10). If
the mechanic needs to interrupt power, your system will automatically return to its
valet mode state when power is restored; there will be no alarm activation and no
need to provide your mechanic with your remote control and instructions on how to
use it.
12