Clifford Falcon II Automobile Alarm User Manual


 
Standard Features of the Falcon II (cont.)
Remote Controlled Valet Mode — A press of a button on the remote
control allows you to enter or exit valet mode. Indicator light flashes
visually confirm valet mode entry and exit.
Remote Controlled Courtesy Lighting
— For your safety and convenience,
when you remotely disarm your Falcon II, the interior lights turn on and
stay on until you start the engine or for 30 seconds, whichever occurs first.
Built-In Indicator Light Flasher — Visually confirms lock and system status.
Dual-Mode Chirp Silencing — Your choice of either long-term chirp
silencing or remote controlled chirp muting whenever you wish.
Patented AutoTesting—Automatically tests all system triggers and sensors
every time you remotely arm and warns you if you accidentally arm your
Falcon II system with the bonnet or boot open.
Patented Malfunction AutoBypass —In the unlikely event of a trigger or
sensor malfunction, Falcon II will automatically bypass the malfunction
and arm all other points to continue relentless protection of your vehicle.
Patented Prior Intrusion Attempt Alert — When you return to your vehicle
and remotely disarm your Falcon II, a special chirp and indicator light
flash sequence will audibly and visually alert you from a distance if an
intrusion attempt was foiled while you were away.
High-Output Siren
Loud siren wail.
Patented Automatic Noise Abatement — The Falcon II limits alarm sounding
to no more than 3 minutes even if a door is left open in the wake of an intrusion
attempt. This ensures against battery drain or towing of your vehicle due to noise
pollution. The system then automatically resets and re-arms all other points.
Selectable Starter/Ignition Interrupt— At the time of installation, you may
choose either a fault-proof mode, which lets you start the engine even in
the unlikely event of a system malfunction, or ultra-secure mode that
ensures a thief won’t be able to start the vehicle even if he finds the
system control unit and disconnects it!
Piezo Sensor— An all-electronic, solid-state vibration/impact sensor that
delivers the utmost reliability and provides more accurate discrimination
between genuine intrusion attempts and non-threatening conditions (like
a heavy vehicle passing by) that cause other sensors to false alarm.
4