Clifford Concept 40 Automobile Alarm User Manual


 
Standard Features of the Concept 4O (cont.)
Remote Headlight Activation Capability— Remotely turn on the
headlights to illuminate your way to and from your vehicle (requires an
optional relay).
Patented Smart AutoTesting™—Automatically tests all system triggers
and sensors every time you remotely arm and warns you if you
accidentally arm your Concept 40 system with the hood or trunk open. If
there is a genuine trigger or sensor malfunction, the system will
specifically identify the problem, thereby eliminating time-consuming
and costly trouble-shooting.
Patented Malfunction AutoBypass™ with Automatic Monitoring —In the
unlikely event of a trigger or sensor malfunction, your Concept 40 will
automatically bypass the malfunction and arm all other points to continue
relentless protection of your vehicle. If you simply left the hood, trunk or
a door open when you armed, just close it and the system will again
monitor that trigger point.
Multiple-Event TotalRecall™— Concept 40’s memory stores the identity of
the last eight trigger and sensor activations. This provides an invaluable
diagnostic means, since, whenever you wish, the system will visually
identify the activated triggers and sensors in reverse chronological order.
Patented Smart Prior Intrusion Attempt Alert — When you return to your
vehicle and remotely disarm your Concept 40, a special chirp and parking
light flash sequence will audibly and visually alert you from a distance if
an intrusion attempt was foiled while you were away. Your Concept 40
will even identify the specific trigger or sensor that detected the intrusion
attempt.
Selectable Starter/Ignition Interrupt— You may choose either a fault-proof
mode, which lets you start the engine even in the unlikely event of a
system malfunction, or ultra-secure mode that ensures a thief won’t be
able to start the vehicle even if he finds the system control unit and
disconnects it!
6