Filter
Top Products
TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button 1 (channel 1) for 3 seconds. The parking lights will
flash repeatedly and the siren will blare for 30 or 60 seconds
(user-selectable), or until you press button 1 again to turn it off. If
the ignition is on (indicating you are in the car), the doors will
automatically lock to prevent an assailant from entering. If the
ignition is off, the doors will unlock, allowing you to enter
immediately without fumbling with your keys.
TO REMOTELY
TURN ON THE
HEADLIGHTS. . . . . . .
Button 2 (channel 2) controls an electronic interlock that lets you
separately command two functions with the same channel: one
when the system is armed and another when disarmed. Pressing
button 2 while the alarm is armed will optionally turn on the
headlights for any duration you wish between one second and two
minutes (the factory setting is 30 seconds; see User-selectable
features on pages 20-24).
TO REMOTELY
OPEN THE TRUNK . . .
Button 2 (channel 2) can control another function when the system
is disarmed, such as an optional remote trunk release. Pressing
button 2 while the alarm is disarmed will remotely open the trunk.
TO ACTIVATE
OTHER OPTIONS
REGARDLESS OF
ALARM STATE. . . . . . .
Button 4 (channel 4) and channels 5–8 (see How to use your
keychain remote control on page 10) can activate accessories
such as the IntelliStart remote engine starter, remote power
window control, electric garage door and entry gate opener(s),
Concept systems on your other vehicles, etc.
What about
channels 9 – 12?. . . .
Channels 9 through 12 control remote valet mode entry/exit (see
page 15), remote override of one or both Proximity Sensor zones
(see page 17), and remote adjustment of each of the two
Proximity Sensor zones (see page 17).
How to interpret the chirps and parking light flashes
When you use the remote control, the system responds with chirps (unless the chirp muting
feature is turned on) and parking light flashes. These chirp/flash acknowledgments mean:
Chirps and flashes Meaning
1
Your system is disarmed or you have remotely exited valet mode (see page 15)
2
Your system is armed or you have remotely engaged valet mode (see page 15)
2 and then 4
Armed but there is a door open (if there was a 5-sec. delay) or the sensor is
malfunctioning (if there was a 10-sec. delay) (see Smart AutoTesting on page 18)
3
Disarmed but there was an intrusion attempt while you were away
(see Smart prior intrusion attempt on page 19)
4
Armed but the hood or trunk is ajar (see Smart AutoTesting on page 18)
12