Clifford Concept 40 Automobile Alarm User Manual


 
Standard Features of the Concept 4O (cont.)
Remotely Adjustable Dual-Zone Proximity Sensor™— With just a touch on
the remote, you may, at any time or place, adjust and test the sensitivity
of this microprocessor-controlled passenger compartment sensor. The two
sensor zones provide full perimeter protection: If someone is lurking near
your car, the system will sound a rapid, multi-chirp warning. But if a thief
actually reaches into the passenger compartment, the system will
instantly blast the siren.
Audible Confirmation of Sensor Adjustments — Issues two chirps for each
incremental increase and a single chirp for each incremental decrease in
sensitivity.
Unprecedented Reliability
— There are no moving mechanical parts to
wear out and the entire electronic circuitry resides in the passenger
compartment.
Adjust and Test Unobtrusively — Set and test sensitivity without activating
the alarm!
Remote Override of Each Sensor Zone—A press of a button on your
remote control will override the Proximity Sensor’s outer warning zone if
you must park in an area with heavy pedestrian traffic. Another press
overrides both zones if you need to leave a passenger or pet in your
vehicle.
User-Selectable Headlight Reminder— Warns you if you forget to turn off
the headlights after you park your vehicle. If your vehicle already has this
feature, you may turn off Concept 40’s Headlight Reminder.
Dual-Mode “Chirp” Silencing—Whenever you remotely arm or disarm,
the siren “chirps” and the parking lights flash to confirm system status.
Whenever you wish, you may silence the chirps with either of these two
methods:
Remote Controlled Chirp Muting —Just a press of remote control button 3
will arm and disarm the system silently. It’s perfect when parking at night in a
quiet residential area.
Long-Term Chirp Silencing —A few flicks of a switch silences the chirps
until you choose to reactivate them.
4