Filter
Top Products
Standard Features of the Concept 4O (cont.)
✔ Patented Remote Control Code Learning — Just a few flicks of a switch
lets you match to the system up to 4 different 12-channel Clifford remote
controls. Just as easily, a lost or stolen remote control can be deleted from
the system memory.
✔ Multiple-Car Control— Lets you use the same remote to control up to
seven different vehicles.
✔ Advanced CMOS Microcomputer —Very large scale integration (VLSI)
microprocessor commands and monitors all system functions more than
1,000,000 times per second, yet it draws less power than the vehicle’s
clock, so it won’t deplete your car battery like other alarms.
✔ High-Luminescence LED Status Indicator with Automatic Battery-Saving
Mode
— Adds visual deterrence and identifies system status. To conserve
vehicle battery power, if the system has remained continuously armed for
48 hours, the flash rate will automatically slow to half the normal rate. If
left continuously armed for 96 hours, the blink rate will slow to
one-quarter the normal rate.
✔
Multiple Sensor/Trigger Inputs
— Separate inputs for two sensors as well as
separate inputs for the doors, trunk and hood for precise trigger/sensor
identification.
✔ Patented SmartPowerUp™ II — When power to the system is
disconnected, the system’s non-volatile memory always remembers the
last state (armed, disarmed or valet mode) and returns to that state when
power is restored. So if a thief disconnects the power and then restores it
in an attempt to start the car, the system will re-arm and instantly sound
the siren while immobilizing the vehicle.
✔ Full-Time Programming Access— You can easily change the status of
nearly 20 different user-selectable features at any time, even while
driving. Clear, audible signals confirm each feature selection and setting.
8