Filter
Top Products
Standard Features of the Concept 50x
(cont.)
✔ Patented Smart AutoTesting— Automatically tests all system triggers and
sensors every time you remotely arm and warns you if you accidentally
arm your Concept 50x system with the hood or trunk open. If there is a
genuine trigger or sensor malfunction, the system will specifically
identify the problem, thereby eliminating time-consuming and costly
trouble-shooting.
✔
Patented Malfunction AutoBypass with Automatic Monitoring
— In the
unlikely event of a trigger or sensor malfunction, Concept 50x
automatically bypasses the malfunction and arms all other points to
continue relentless protection of your vehicle. If you simply left the hood,
trunk or a door open when you armed, just close it and the system will
again monitor that trigger point.
✔ Multiple-Event TotalRecall— Concept 50x’s memory stores the identity of
the last eight trigger and sensor activations. This provides an invaluable
diagnostic means, since, whenever you wish, the system will visually
identify the activated triggers and sensors in reverse chronological order.
✔ Patented Remote Control Code Learning with MultiRemote Recognition —
Just a few flicks of a switch lets you match to the system up to 4 different
12-channel Clifford ACG remote controls. Just as easily, a lost or stolen
remote control can be deleted.
✔
Multiple-Car Control
— You may use the same remote to control Concept
50x systems on up to six of your other vehicles.
✔ High-Luminescence LED Status Indicator — Adds visual deterrence and
identifies system status.
✔ Patented SmartPowerUp II — When power to the system is disconnected,
the system’s non-volatile memory always remembers the security
system’s last state (armed or disarmed) and returns to that state when
power is restored. So if a thief disconnects the power and then restores it
in an attempt to start the car, the system will instantly re-arm.
5