Filter
Top Products
28
© 2005 directed electronics—all rights reserved
➤ Power Saver in Valet Mode: When the system enters Valet
Mode the in-vehicle status LED illuminates steadily. If the
vehicle is not used (ignition is not turned on) for a one hour
period while the system is in Valet Mode, the status LED will
shut off. If the system remains in Valet Mode, the status LED
will come back on the next time the ignition is turned on and
then back off.
pprrooggrraammmmiinngg ooppttiioonnss
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some
may require installation labor.
The following is a list of the programmable options, with the
factory settings in Bold.
➤ The ignition controlled door lock feature
oonn
or off: When
this feature is programmed on, the doors will lock three
seconds after the ignition is turned on, and unlock when the
ignition is turned off. If your installer is programming the
security system with the Directed Bitwriter, ignition lock
and unlock are independent features that can be
programmed separately.
➤ Passive door locking (with passive arming) or
aaccttiivvee ddoooorr
lloocckkiinngg
(only when locking with the 2-way remote). Passive
locking allows the vehicle's doors to lock (after the 30-