Filter
Top Products
17
© 2005 directed electronics—all rights reserved
The in-vehicle status LED will light steadily if you are entering
Valet Mode, and it turn off if you are exiting Valet Mode.
The remote will respond with 3 Orange LED flashes on entering
and 2 beeps and 3 Orange LED flashes on exiting Valet Mode.
remote start
This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm
up the engine, as well as adjust the interior temperature of the ve-
hicle with the climate control system. If interior heating or
cooling is desired, the climate controls must be preset, and the
fan blower must be set to the desired level prior to remote starting
the vehicle.
To remote start the vehicle:
1. Press on the 2-way remote twice within 3 seconds.
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. In gasoline vehicles, the engine will start 4 seconds after the
parking lights flash. In diesel vehicles, the engine will start
when the WAIT-TO-START indicator on the vehicle's dash
goes out.
iimmppoorrttaanntt!!
(1) Never remote start your vehicle when the
keys are in the ignition, except when performing Valet
®
Take-Over, and (2) Never start the vehicle if it is not in
either PARK or NEUTRAL.
➜