Filter
Top Products
The following diagram illustrates how the Remote Transmitter controls the functions of the
system when used in the Ungo Standard Mode:
Convenience Mode
This configuration allows the MS5500 to operate with separate Arm and Disarm buttons for
greater convenience and ease of use.
Button 1 Arms the system. This Button also locks the doors when the system is in Valet Mode.
Button 2 Disarms the system. Pressing Button 2 again activates the system’s Auxiliary Function
1. This Button also unlocks the doors when the system is in Valet Mode.
If the system is Armed, pressing Button 2 will Disarm the system.
If the system is Disarmed, pressing Button 2 will activate the Auxiliary Function 1.
If the system is in Valet and the doors, pressing Button 2 will unlock the doors.
The following diagram illustrates how the Remote Transmitter controls the functions of the
system when used in the Convenience Mode:
Driver Door Priority Mode*
This configuration adds the security of unlocking only the driver’s door when the system is
Disarmed. Pressing the Disarm button again will unlock all remaining doors.
Button 1 Arms the system. This Button also locks the doors when the system is in Valet Mode.
MS5500 Owner’s Manual - Page 3
Mode Sequence
None:Green:Orange:Red:None:...
ARM/DISARM
AUX 1
AUX 2
MODE
green
MODE
none
MODE
orange
not used
not used
not used
not usednot used
MODE
red
BUTTON 1
BUTTON 2
MODE BUTTON
ARM
DISARM / AUX 1*
AUX 2
MODE
green
MODE
none
MODE
orange
not used
not used
not used
not used
not used
MODE
red
BUTTON 1
BUTTON 2
MODE BUTTON
Mode Sequence
None:Green:Orange:Red:None:...
*AUX 1 when system is Disarmed
MS5500_owner’s 1.34.qxd 12/6/99 12:15 PM Page 3