Filter
Top Products
Black plate (37,1)
Chevrolet Cruze Owner Manual (GMNA-Localizing-U.S./Canada-6007168) -
2014 - CRC - 2/22/13
Vehicle Care 10-37
4. Remove the taillamp assembly
by pulling it straight back.
5. Remove the bulb socket from
the taillamp assembly by turning
it counterclockwise.
6. Install a new bulb into the bulb
socket.
7. Install the bulb socket into the
taillamp assembly by turning it
clockwise.
8. Install the taillamp assembly and
tighten the two screws.
9. Close the two screw covers.
License Plate Lamp
To replace the license plate
lamp bulb:
1. Remove the two screws from the
license plate lamp assembly.
2. Turn and pull the license plate
lamp assembly down.
3. Turn the bulb socket
counterclockwise and pull
straight out of the lamp
assembly.
4. Remove the bulb by pulling it
straight out of the socket.
5. Push the new bulb into the
socket.
6. Install the bulb socket by turning
clockwise into the license plate
lamp assembly.
7. Replace the license plate lamp
assembly and tightien the two
screws to secure.