Filter
Top Products
Black plate (7,1)
Chevrolet Cruze Owner Manual (GMNA-Localizing-U.S./Canada-6007168) -
2014 - CRC - 2/22/13
Lighting 6-7
Lighting Features
Entry Lighting
The headlamps, parking lamps,
taillamps, back-up lamps, and
most of the interior lamps turn on
briefly when
K is pressed on the
Remote Keyless Entry (RKE)
transmitter. After about 30 seconds
the exterior lamps turn off, and then
the dome and remaining interior
liamps will dim to off. Entry lighting
can be disabled manually by
changing the ignition out of the
OFF position, or by pressing the
RKE transmitter
Q button.
This feature can be changed. See
“Vehicle Locator Lights” under
Vehicle Personalization on
page 5-36.
Exit Lighting
The headlamps, taillamps, parking
lamps, back-up lamps, and license
plate lamps come on at night, or in
areas with limited lighting, when the
key is removed from the ignition.
The dome lamps also come on
when the key is removed from the
ignition. The exterior lamps and
dome lamps remain on after the
door is closed for a set amount of
time, then automatically turn off.
If equipped with Keyless Access,
the exterior lamps and dome lamps
automatically turn on when a door is
opened after the ignition is turned
off. See Ignition Positions (Keyless
Access) on page 9-15 or Ignition
Positions (Key Access) on
page 9-17.
The exterior lamps turn off
immediately by turning the exterior
lamp control off.
This feature can be changed.
See Vehicle Personalization on
page 5-36.
Battery Power Protection
The battery saver feature is
designed to protect the vehicle's
battery.
If some interior lamps are left on
and the ignition is turned off, the
battery rundown protection system
automatically turns the lamp off after
some time.