Filter
Top Products
Black plate (34,1)
Chevrolet Cruze Owner Manual (GMNA-Localizing-U.S./Canada-6007168) -
2014 - CRC - 2/22/13
10-34 Vehicle Care
5. Remove the bulb (3) from the
headlamp assembly by turning
counterclockwise and pulling
straight back.
6. Install the new bulb in the
headlamp assembly by turning
clockwise.
7. Install the wiring harness
connector to the bulb. Be sure
the connector release (2) locks
into place.
8. Install the connector
retaining tab (1).
9. For the driver side, reinstall the
windshield washer bottle filler
neck by firmly pushing it straight
into the bottle. Ensure that the
filler neck clip engages into the
underhood electrical center
retainer.
Parking/Turn Signal Lamp
1. Open the hood. See Hood on
page 10-4.
2. For the driver side bulb, remove
the windshield washer bottle
filler neck by firmly pulling it
straight up and out of the bottle.
3. Remove the parking/turn signal
lamp bulb socket from the
headlamp assembly by turning
counterclockwise.
4. Remove the bulb from the bulb
socket.
5. Install the new bulb in the bulb
socket.
6. Install the bulb socket into the
headlamp assembly by turning
clockwise.
7. For the driver side, reinstall the
windshield washer bottle filler
neck by firmly pushing it straight
into the bottle. Ensure that the
filler neck clip engages into the
underhood electrical center
retainer.