Chevrolet 2010 Impala Automobile User Manual


 
The cruise control buttons
are located on left side of
the steering wheel.
T (On/Off): Press to turn cruise control on and off.
The indicator is lit when cruise control is on.
+ RES (Resume/Accelerate): Press briefly to make the
vehicle resume to a previously set speed, or press and
hold to accelerate.
SET : Press to set the speed and activate cruise
control or make the vehicle decelerate.
[ (Cancel): Press to disengage cancel cruise control
without erasing the set speed from memory.
Setting Cruise Control
The cruise control light on the instrument panel cluster
comes on after the cruise control has been set to the
desired speed. See Instrument Panel Cluster
on
page 422
.
{
WARNING:
If you leave your cruise control on when you are
not using cruise, you might hit a button and go
into cruise when you do not want to. You could be
startled and even lose control. Keep the cruise
control switch off until you want to use cruise
control.
1. Press the
T button to turn the cruise system on.
2. Get up to the desired speed.
3. Press and release the SET button located on the
steering wheel.
4. Take your foot off the accelerator.
4-7