Filter
Top Products
7. To tighten the belt, push down on the child
restraint, pull the shoulder portion of the belt to
tighten the lap portion of the belt and feed the
shoulder belt back into the retractor. When
installing a forward-facing child restraint, it might
be helpful to use your knee to push down on the
child restraint as you tighten the belt.
8. Tighten the top tether. See Lower Anchors and
Tethers for Children (LATCH) on page 2‑46.
9. Push and pull the child restraint in different
directions to be sure it is secure.
If the vehicle is equipped with the passenger sensing
system, and when the passenger sensing system has
turned off the right front passenger frontal airbag, the
off indicator on the passenger airbag status indicator
should light and stay lit when you start the vehicle.
See Passenger Airbag Status Indicator on page 4‑23.
If a child restraint has been installed and on indicator is
lit, see “If the On Indicator is Lit for a Child Restraint”
under Passenger Sensing System
on page 2‑74
for
more information.
To remove the child restraint, unbuckle the vehicle
safety belt and let it return to the stowed position.
2-65