Filter
Top Products
Removing the Tailgate
To remove the tailgate:
1. With the tailgate fully open, lift up slightly on the
entire tailgate assembly.
2. Remove the retaining
cables from both sides
of the tailgate by
pulling the clips away
from the bolt heads
while pushing the cable
bracket forward. When
the larger part of the
hole on the bracket is
over the bolt, slide the
bracket off of the bolt.
3. With the tailgate partially down, lift up on the
passenger side and pull the tailgate toward you,
then move the tailgate to the right to release the
driver side. You can then remove the entire tailgate
assembly.
Reverse the procedure to reinstall the tailgate. Make
sure it is secure.
To partially lower the tailgate:
1. With the tailgate fully open, lift up slightly on the
entire tailgate assembly.
Tailgate Partially Down
2. Remove the retaining
cable from the
passenger side of the
tailgate by pulling the
clip away from the bolt
head while pushing the
cable bracket forward.
When the larger part of the hole on the bracket is
over the bolt, slide the bracket off the bolt.
3. Slide the lower end fitting onto the top bolt. The
tailgate will now stay in the partially opened
position.
4. Repeat Steps 2 and 3 for the driver side.
If you would like to close the tailgate, the bracket cannot
be in the partially opened position. Use the top position
on the bracket to anchor it on the bottom bolt.
3-11