Filter
Top Products
Windshield Wipers
Be sure to clear ice and snow from the wiper
blades before using them. If the wiper blades are
frozen to the windshield, gently loosen or thaw
them. If the blades do become damaged,
install new blades or blade inserts. See Windshield
Wiper Blade Replacement on page 335.
Heavy snow or ice can overload the wiper motor.
A circuit breaker will stop the motor until it
cools down. Clear away snow or ice to prevent an
overload. If the wipers gets stuck, turn the
wipers off, clear away the snow or ice, and then
turn the wipers back on.
Use this lever, located on the right side of the
steering wheel, to operate the windshield wipers.
1 (High Speed): Move the lever to this
position for steady wiping at high speed.
6 (Low Speed): Move the lever to this
position for steady wiping at low speed.
&(Delay): Move the lever to this position to set
a delay between wipes.
157