Filter
Top Products
Windshield Wipers
You control the windshield wipers by turning the
band with the wiper symbol on it.
8(Mist): For a single wiping cycle, turn the
band to mist. Hold it there until the wipers start,
then let go. The wipers will stop after one wipe.
If you want more wipes, hold the band on
mist longer.
Delay: You can set the wiper speed for a long or
short delay between wipes. This can be very
useful in light rain or snow. Turn the band
to choose the delay time. The closer to the top
of the lever, the shorter the delay.
d (Low Speed): For steady wiping at low
speed, turn the band away from you to the first
solid band past the delay settings. position.
For high-speed wiping, turn the band further, to
the second solid band past the delay settings.
To stop the wipers, move the band to off position.
a (High Speed): For high-speed wiping,
turn the band further, to the second solid band
past the delay settings.
9(Off): To stop the wipers, move the band to off.
Be sure to clear ice and snow from the wiper
blades before using them. If they’re frozen to
the windshield, carefully loosen or thaw them.
If your blades do become worn or damaged, get
new blades or blade inserts.
150