Filter
Top Products
Getting to Know Your TrailBlazer
6
Remote Lock/Unlock Feedback
(if equipped)
Program Remote Keyless Entry
System lock/unlock feedback (horn,
parking lamps, both or neither)
• Press the Personalization button on
your steering wheel until REMOTE
LOCK FEEDBACK (or unlock, as
desired) appears on the display.
• Press the Select button to scroll
through the menu of choices. To
program the lock/unlock feedback
feature, press the Personalization
button when the desired menu option
is displayed.
See Section 3 of your Owner Manual.
Select and program functions
(if vehicle is equipped with a Driver
Information Center)
• Press the personalization button on
the Driver Information Center until
AUTOMATIC LOCKING appears on
the display. Press the Select button
until the desired setting appears on
the display and press the
Personalization button to select it.
Select and program functions if not
equipped with DIC
• With ignition OFF, pull the turn
signal/multifunction stalk toward you
and hold it there while performing the
next step.
•Turn the ignition key to RUN and
LOCK twice, ending in the LOCK
position, and release the turn signal
stalk; the lock switch locks/unlocks,
the horn chirps twice and a 30-sec-
ond timer begins.
•To cycle through the locking/unlock-
ing choices, press the power door
lock switch to the LOCK position to
set locking preference and the
UNLOCK position to set unlocking
preference.
• When the lock switch locks/unlocks
and the horn chirps twice, you have
left programming mode; if more time
is needed, repeat the process above.
•To exit the program mode manually,
turn the ignition key to RUN.
See Section 2 of your Owner Manual.
Headlamp Controls and Washer
The exterior lamps knob is located on
the instrument panel to the left of the
steering wheel.
Activate the automatic headlamp
system that illuminates all exterior
lamps and the instrument panel/radio
lights when needed
•Turn the knob clockwise to the first
position.
15804 Trailblazer 6/6/03 4:29 PM Page 6