Filter
Top Products
Getting to Know Your TrailBlazer
10
Heated Seats (if equipped)
Activate heat for the seatback only
• Press the vertical switch located on
the front door armrest until the switch
light indicates the desired setting.
Activate heat for seatback and seat
cushion
• Press the horizontal switch located on
the front door armrest until the switch
light indicates the desired setting.
See Section 1 of your Owner Manual.
The memory seat controls are located
on the driver door. They program and
recall driver seat position and outside
mirror settings for up to two drivers.
Store the driver seat and mirror
settings
• Adjust the seat and outside mirrors to
the desired position.
• Press and hold memory button #1 for
three seconds until a chime sounds
to indicate that the seat position is
now stored.
Repeat the sequence using memory
button #2 for a second driver.
See Section 2 of your Owner Manual.
Note: The engine must be running for
the heated seat feature to work.
Memory Seats (if equipped)
AM/FM Stereo with Cassette/
CD and RDS (if equipped)
Set the automatic volume (AUTO
VOL) feature
• Set the volume at the desired level.
• Press the AUTO VOL button and
select LOW, MEDIUM or HIGH.
(Each higher setting will allow for
more volume compensation at faster
vehicle speeds.)
• Select OFF if you prefer not to use
AUTO VOL.
15804 Trailblazer 6/6/03 4:29 PM Page 10