Chevrolet 2004 Automobile User Manual


 
5
Use Reset button
When you find the choice you want,
press to select it and move on to
the next feature.
Reset all personalization features to
their default settings
Press and hold the Trip Information
button and the Personalization button
down for four seconds.
Recall driver preferences
Press any button on the Remote
Keyless Entry System transmitter or
press Memory button #1 or #2 on the
driver’s door.
Available Personalization Features
Depending on the equipment ordered
on your vehicle, you could personalize a
wide variety of preferences on the DIC.
Only the features included on your vehi-
cle will be displayed by the DIC.
Personalization features can include:
Alarm Warning Type
Automatic Locking and Unlocking
Seat Position Recall
Perimeter Lighting
Remote Lock and Unlock Feedback
Headlamps On at Exit
Mirror Curb View Assist
Easy Exit Driver Seat
Display Units (English/Metric)
Display Language
See Section 3 of your Owner Manual.
Programmable Automatic
Door Locks
Your vehicle features an automatic door
lock/unlock feature with a choice of four
features, as well as automatic door lock-
out prevention to prevent locking the
keys in the vehicle. In the event the
power door lock switch is activated
when a door is open and the key is in
the ignition, the driver door will unlock.
Locking Options: The default setting
for the programmable automatic door
locks is to lock automatically when the
transmission is shifted into gear. Other
locking options include:
Mode 1: All doors lock when the trans-
mission is shifted into gear
Mode 2: All doors lock when vehicle
speed is over 8 mph (13 kph)
Mode 3: No automatic door locking
Unlocking options: Choose one of the
following options before personalizing
your unlocking preference:
Mode 1: Driver’s door unlocks when the
transmission is placed into PARK
Mode 2: All doors unlock when the
transmission is shifted into PARK
Mode 3: All doors unlock when the key
is removed from the ignition
Mode 4: No automatic door unlock
15804 Trailblazer 6/6/03 4:29 PM Page 5