Filter
Top Products
Waste Water Tank Dumping:
To dump the exterior black waste water tank:
1. Remove support strap retainer pin and lower sewage hose.
2. Connect the dump fitting,(stored in the storage compartment behind the large access door),to the end of the
assembly.
3. Securely place the dump fitting and assembly in the local waste receptacle.
4. Pull the black water gate valve handle, (to open) to dump the tank contents.
To dump the grey waste water tank:
1. Follow the same procedure using the grey water gate valve handle located in front of the sewage
discharge assembly.
2. Be sure to dump the grey waste water tank last so as to help flush out any solid waste in the sewage hose
from the black waste water tank.
3. Once the tanks are empty,close the gate valves,remove the fitting,return the assembly to its support structure
and ensure that all caps and supports are securely in place.
4. If desired,flush both waste tanks after dumping.
NOTICE: It is recommended to always dump the black water tank first, then the grey water tank.
CAUTION:WHEN FINISHED DUMPING THE BLACK AND GREY TANKS AND THE ASSEMBLY IS TILTED BACK TO
ITS STORAGE POSITION.INSERT RETAINER PIN TO PREVENT THE ASSEMBLY FROM FALLING WHILE DRIVING,
(see Picture G-P8).
Home & Park Motorhomes makes no warranty what so ever for damage caused to the sewage discharge assembly as a result of this.
WATER SYSTEMS
DDoocc NNoo::
21906503
RReevv::
02 Copyright © Hanmar Motor Corporation 2005
GG--44
Picture G-P10: Removal of the end cap.
Picture G-P8: Proper driving location of
support strap.
Grey tank
valve
Black tank
valve
Support Strap