Filter
Top Products
2. Locate the placement of where to put the jack,
using the diagram above, when a front tire needs
to be changed. Use the bolts (A) as a guide
when positioning the jack lift head (C) near the rear
edge of the front wheel opening (B).
For jacking at the vehicle’s front location, put jack
lift head about 7.5 inches (19 cm) from the rear
edge of the front wheel opening in the cutout of the
rocker panel molding.
Locate the placement of where to put the jack,
using the diagram above, when a rear tire needs to
be changed. Use the notch (B) as a guide when
positioning the jack lift head (A) near the front edge
of the rear wheel opening (C).
For jacking at the vehicle’s rear location, put the
jack lift head about 4 inches (10 cm) from the front
edge of the rear wheel opening in the cutout of
the rocker panel molding.
3. Put the compact spare tire near you.
Jack Placement – Front Tire
Jack Placement – Rear Tire
5-80