Filter
Top Products
To remove the steel wheel
covers and wheel nut
caps, loosen the plastic nut
caps with the wheel
wrench in a
counterclockwise direction.
If needed, you can
finish loosening them with
your fingers. The plastic
nut caps will not come off.
Use the flat end of the wheel wrench and pry along the
edge of the cover until it comes off. The edge of the
wheel cover could be sharp, so do not try to remove it
with your bare hands. Do not drop the cover or lay
it face down, as it could become scratched or damaged.
Once you have removed the wheel cover, center cap, or
wheel nut caps, use the following procedure to remove
the flat tire and install the spare tire.
1. Turn the wheel wrench once on each wheel nut to
loosen them. Don’t remove them yet.
5-79