Filter
Top Products
The transaxle fluid dipstick
handle is the black loop
near the rear of the engine
compartment, toward
the center. See Engine
Compartment Overview on
page 5-12 for more
information on location.
Then, without shutting off the engine, follow these steps:
1. Pull out the dipstick and wipe it with a clean rag
or paper towel.
2. Push it back in all the way, wait three seconds and
then pull it back out again.
3. Check both sides
of the dipstick, and
read the lower
level. The fluid level
must be in the
cross-hatched area.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.
3400 V6 engine shown,
3800 V6 and
3800 V6 Supercharged
engines similar
3400 V6 engine shown,
3800 V6 and
3800 V6 Supercharged
engines similar
5-28