Filter
Top Products
Mounting Electronics (Stick LiPo)
This is the recommended electronics installation when the DB10R is powered by a stick LiPo battery.
You will need to purchase the “Stick LiPo Mounting Kit” (www.bmiracing.com, DB5900) in order to fit the
battery. The “Stick LiPo Mounting Kit” consists of 2 longer alloy stand offs that makes room for the taller
battery.
Note that this lay out is not ideal as you will need to add weight equal to the weight of your speed control
to the right side of the car to balance the weight of the speed control.
Congratulations!
You have completed the assembly of the DB10R Kit.
Please look over the base setup sheet to check your basic setup.