Filter
Top Products
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
• G Turn and Lane-Change Signals. See
Turn and Lane-Change Signals on page 163.
• O Headlamps. See Headlamps on page 172.
• 3 Headlamp High/Low Beam-Changer.
See Headlamp High/Low-Beam Changer
on page 164.
• Flash-To-Pass Feature. See Flash-to-Pass on
page 164.
• - Fog Lamps. See Fog Lamps on page 175.
• I Cruise Control. See Cruise Control on
page 168.
Turn and Lane-Change Signals
To signal a turn, move the lever all the way up or
down. The lever returns automatically when
the turn is complete.
An arrow on the
instrument panel cluster
will flash in the
direction of the turn or
lane change.
Raise or lower the lever until the arrow starts to
flash to signal a lane change. Hold it there until the
lane change is complete. The lever returns to its
original position when it is released.
Rapid flashing of arrows when signaling for a turn
or lane change may be caused by a burned-out
signal bulb. Other driver’s will not see the signal.
Replace burned-out bulbs to help avoid possible
accidents. Check the fuse and for burned-out bulbs
if the arrow fails to work when signaling a turn.
See Fuses and Circuit Breakers on page 447 for
more information.
163