Filter
Top Products
Set Memory Positions
1. With the vehicle in Park, adjust
the power driver’s seat, power
adjustable pedals, power outside
mirrors, and power tilt/telescopic
steering column to the desired
positions.
2. Press and release the SET button
and then press and hold button 1
on the driver’s door until a beep sounds.
3. Repeat the steps using button 2 for a second driver.
Set Exit Position
1. Adjust the power driver’s seat, power adjustable pedals, and the
power tilt/tele scopic steering column to the desired positions.
2. Press and release the SET button and then press and hold the
EXIT button on the driver’s door until a beep sounds.
Recall Positions
With the ignition on and the vehicle in Park, press and release
button 1 or 2 or the button to recall the stored position.
With the ignition off or when the vehicle is not in Park, press
and hold button 1 or 2 or the button until the stored position
is reached. Releasing the button before the stored position is
reached stops the recall.
Note: To change the memory recall and exit settings, go to Comfort and
Convenience in the Vehicle Settings menu.
See Seats and Restraints in your Owner Manual.
18
POWER FRONT SEATS
Seat Adjustments
A. Seat Cushion Adjustment
Move the front horizontal
control to move the seat
forward or rearward, or to tilt,
raise or lower the seat.
B. Seatback Adjustment
Move the vertical control to
recline or raise the seatback.
C. Lumbar Adjustment
Move the rear control fore/aft to increase/decrease lumbar
support or up/down to raise/lower the lumbar location.
Additional Seat Adjustments (Platinum Model)
D. Feature Select Control
Press and release the control
to display the seat adjustment
features on the CUE screen.
Press and hold to scroll
through the adjustments.
E. 4-Way Control Pad
Use the 4-way control pad to
make adjustments up, down,
forward, or rearward to the selected feature.
F. Massage On/Off
With the ignition on, press to recall the last massage type and
intensity.
C
B
E
A
D
F