Filter
Top Products
17
POWER LIFTGATE
POWER ASSIST STEPS♦
Open/Close the Power Liftgate
Press the Power
Liftgate button on the
RKE transmitter twice.
Press the Power
Liftgate knob on the
overhead console.
Press the touchpad (A)
on the liftgate handle
to open the liftgate.
Press the button (B)
next to the liftgate latch to close the liftgate.
Programming the Liftgate Height
1. Turn the Power Liftgate knob to the 3/4 mode position.
2. Open the liftgate.
3. Adjust the liftgate manually to the
desired height.
4. To save the setting, press and hold the
button next to the liftgate latch (B)
for 3 seconds. The turn signals will ash
when the setting is saved.
Hands-Free Operation
To open or close the liftgate hands-free, kick your foot straight
in and out under the center of the rear bumper. Do not swing
your foot side-to-side.
The RKE transmitter must be within 3 feet of the liftgate.
See Keys, Doors and Windows in your Owner Manual.
The power assist steps lower automatically when a door is opened
and retract after the doors are closed.
To deploy the steps for cleaning and car washes, with the
ignition on and the vehicle in Park or with the vehicle running
and in Neutral, press the
Power Assist Steps button on the
left side of the CUE touch screen. Press the button again to
retract the steps.
To lock/disable the steps or to unlock/enable the steps, with the
ignition on and the vehicle in Park or Neutral, press and hold
the
button for 4 seconds.
See Keys, Doors and Windows in your Owner Manual.
B
A
SUNROOF♦
Open/Close the Sunroof
Press the rear of the
SLIDE TILT
Sunroof Tilt
switch to vent the
sunroof.
Fully press the rear of
the
SLIDE TILT
Sunroof Slide
switch to express-open
the sunroof.
Fully press the front of
either
SLIDE TILT
Sunroof switch to express-close the sunroof.
See Keys, Doors and Windows in your Owner Manual.
♦ Optional equipment