Cadillac 2013 Automobile User Manual


 
Black plate (45,1)
Cadillac Escalade/Escalade ESV Owner Manual - 2013 - CRC 2nd Edition - 10/
9/12
Vehicle Care 10-45
Belt: A rubber coated layer of
cords between the plies and the
tread. Cords may be made from
steel or other reinforcing
materials.
Bead
: The tire bead contains
steel wires wrapped by steel
cords that hold the tire onto
the rim.
Bias Ply Tire
: A pneumatic tire
in which the plies are laid at
alternate angles less than
90 degrees to the centerline of
the tread.
Cold Tire Pressure
: The
amount of air pressure in a tire,
measured in kPa (kilopascal)
or psi (pounds per square inch)
before a tire has built up heat
from driving. See Tire Pressure
on page 1047.
Curb Weight
: The weight of a
motor vehicle with standard and
optional equipment including the
maximum capacity of fuel, oil,
and coolant, but without
passengers and cargo.
DOT Markings
: A code molded
into the sidewall of a tire
signifying that the tire is in
compliance with the U.S.
Department of Transportation
(DOT) Motor Vehicle Safety
Standards. The DOT code
includes the Tire Identification
Number (TIN), an alphanumeric
designator which can also
identify the tire manufacturer,
production plant, brand, and
date of production.
GVWR
: Gross Vehicle Weight
Rating. See Vehicle Load Limits
on page 915.
GAWR FRT
: Gross Axle Weight
Rating for the front axle. See
Vehicle Load Limits on
page 915.
GAWR RR
: Gross Axle Weight
Rating for the rear axle. See
Vehicle Load Limits on
page 915.
Intended Outboard Sidewall
:
The side of an asymmetrica l tire,
that must always face outward
when mounted on a vehicle.
Kilopascal (kPa)
: The metric
unit for air pressure.
Light Truck (LT-Metric) Tire
: A
tire used on light duty trucks and
some multipurpose passenger
vehicles.
Load Index
: An assigned
number ranging from 1 to 279
that corresponds to the load
carrying capacity of a tire.
Maximum Inflation Pressure
:
The maximum air pressure to
which a cold tire can be inflated.
The maximum air pressure is
molded onto the sidewall.