Filter
Top Products
Approach Lighting
This feature allows you to select whether or not to
have the exterior lights turn on briefly during low light
periods after unlocking the vehicle using the Remote
Keyless Entry (RKE) or keyless access transmitter.
Press the customization button until Approach Lighting
appears on the DIC display. Press the set/reset
button once to access the settings for this feature.
Then press the menu up/down button to scroll through
the following settings:
Off: The exterior lights will not turn on when you unlock
the vehicle with the transmitter.
On (default): If it is dark enough outside, the exterior
lights will turn on briefly when you unlock the vehicle
with the transmitter.
The lights will remain on for 20 seconds or until the lock
button on the transmitter is pressed, or the vehicle is
no longer off. See Remote Keyless Entry (RKE) System
Operation on page 2-6 and Keyless Access System
Operation on page 2-9 for more information.
No Change: No change will be made to this feature.
The current setting will remain.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
Factory Settings
This feature allows you to set all of the customization
features back to their factory default settings.
Press the customization button until Factory Settings
appears on the DIC display. Press the set/reset
button once to access the settings for this feature.
Then press the menu up/down button to scroll
through the following settings:
Restore All (default): The customization features will
be set to their factory default settings.
No Change: The customization features will not be set
to their factory default settings.
To select a setting, press the set/reset button while the
desired setting is displayed on the DIC.
3-76