Filter
Top Products
2(Headlamps): Turn the control to this position
to turn on the headlamps together with the following
lamps listed below.
When the headlamps are turned on while the vehicle
is on, the headlamps will turn off automatically
10 minutes after the ignition is turned off. When the
headlamps are turned on while the vehicle is off,
the headlamps will stay on for 10 minutes before
automatically turning off to prevent the battery from
being drained. Turn the headlamp control to off and
then back to the headlamp on position to make
the headlamps stay on for an additional 10 minutes.
• Parking Lamps
• Instrument Panel Lights
• Taillamps
• License Plate Lamps
IntelliBeam
®
Intelligent High-Beam
Headlamp Control System
If your vehicle has this feature, be sure to read this
entire section before using it.
IntelliBeam
®
is an enhancement to your vehicle’s
headlamp system. Using a digital light sensor on your
rearview mirror, this system will turn the vehicle’s
high-beam headlamps on and off according to
surrounding traffic conditions.
The IntelliBeam
®
system will turn your high-beam
headlamps on when it is dark enough, there is no other
traffic present, and the IntelliBeam
®
system is enabled.
Turning On and Enabling IntelliBeam
®
Press and release the IntelliBeam
®
button on the
inside rear view mirror. The IntelliBeam
®
indicator
on the mirror will turn on to let you know the system
has been turned on. Once the system has been turned
on, it will remain on each time the vehicle is started.
Additionally, the IntelliBeam
®
system must be enabled.
To enable the IntelliBeam
®
system, turn the exterior lamp
control to AUTO, with the turn signal/multifunction lever in
its neutral position. The High-Beam On Light will appear
on the instrument panel cluster when the high-beams
are on. See Highbeam On Light on page 3-44.
3-15