Filter
Top Products
To display the last message, perform the
following steps:
1. Press the tune/select knob to enter the
main menu.
2. Turn the tune/select knob until RECALL RDS
MESSAGE displays.
3. Press the tune/select knob and the message
displays.
Once the message displays, MSG disappears
from the display until another new message
is received.
TP (Traffic Program): TP displays when the
radio detects a signal from an RDS station that has
traffic announcement broadcast capability.
TA (Traffic Announcement): If TA displays, the
tuned radio station broadcasts traffic
announcements, and when a traffic announcement
comes on the tuned station, you will hear it.
If the station does not broadcast traffic
announcements, when TA is turned on it seeks to a
station that does. When a station that broadcasts
traffic announcements is found, the radio stops
seeking and TA displays. If no station is found that
broadcasts traffic announcements, No Traffic
displays.
The radio plays traffic announcements if the volume
is low. The radio interrupts the play of a CD if the
last tuned station broadcasts traffic
announcements.
To turn TA on or off, perform the following steps:
1. Press the tune/select knob to enter the
main menu.
2. Turn the tune/select knob until TRAFFIC
ANNOUNCE displays.
3. Press the tune/select knob to select ON or
OFF. An X appears in the box when ON is
selected.
4. Press the BACK (F6) button to exit the
display. To return to the original display,
repeatedly press the BACK (F6) button or wait
for the display to time out.
289