Filter
Top Products
10-32 Vehicle Care
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Push the lamp assembly back
into position until the release tab
locks into place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-Up Lamp 4157 K
Fog Lamp H10
Front Turn
Signal Lamp
4157 NAK
Front Side Marker
Lamp (Base)
194
High‐Beam
Headlamp (Base)
H7
Exterior Lamp
Bulb
Number
License Plate Lamp 194
Low‐Beam
Headlamp/Daytime
Running
Lamp (DRL)
H11
Stop Lamp/Turn
Signal Lamp
4157 K
Taillamp 4157 K
For replacement bulbs not listed
here, contact your dealer.
Electrical System
Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
greatly reduces the chance of circuit
overload and fire caused by
electrical problems.