Filter
Top Products
7-28 Infotainment System
Using the Delete All Name Tags
Command
The delete all name tags command
deletes all stored phone book name
tags and route name tags for
OnStar, if stored.
To delete all name tags:
1. Press
b g.
.
For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Delete all name tags.” The
system responds “You are about
to delete all name tags stored in
your phone directory and your
route destination directory. Are
you sure you want to do this?
Please say yes or no.”
.
Say “Yes” to delete all
name tags.
.
Say “No” to cancel the
function and return to the
main menu.
Making a Call
Calls can be made using the
following commands:
.
Dial
.
Digit Dial
.
Call
.
Re‐dial
Using the Dial Command
1. Press
b g.
.
For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Dial.” The system responds
“Dial using <phone name>.
“Number please,” followed by
a tone.
3. Say the entire number without
pausing.
.
If the system recognizes
the number, it responds
with “OK, Dialing” and dials
the number.
.
If the system does not
recognize the number, it
confirms the numbers
followed by a tone. If the
number is correct, say
“Yes.” The system responds
“OK, Dialing” and dials the
number. If the number is