Filter
Top Products
Black plate (26,1)
Buick Regal Owner Manual - 2011
7-26 Infotainment System
3. Say “Change phone.” The
system responds “Please wait
while I search for other phones.”
.
If another phone is found,
the response will be
“<Phone name> is now
connected.”
.
If another phone is not
found, the original phone
remains connected.
Storing Name Tags
The system can store up to
30 phone numbers as name tags
that are shared between the
Bluetooth and OnStar systems.
The system uses the following
commands to store and retrieve
phone numbers:
.
Store
.
Digit Store
.
Directory
Using the Store Command
The store command allows a phone
number to be stored without
entering the digits individually.
1. Press
b / g.
.
For vehicles without a
navigation system, the
system responds “Ready,”
followed by a tone.
.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say
“Hands Free.” The system
responds “Ready,” followed
by a tone.
2. Say “Store.” The system
responds “Store, number
please,” followed by a tone.
3. Say the complete phone number
to be stored without pausing.
.
If the system recognizes
the number, the response is
“OK, Storing.”
.
If the system does not
recognize the phone
number, the response is
“Store <Phone number>.”
“Please say yes or no.” If
the number is correct, say
“Yes.” If the number is not
correct, say “No.” The
system will ask for the
number again.
4. After the system stores the
phone number, it responds
“Please say the name tag,”
followed by a tone.
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds “About to store <name
tag>. Does that sound OK?”
.
If the name tag does not
sound correct, say “No” and
repeat Step 5.
.
If the name tag sounds
correct, say “Yes” and the
name tag is stored. After