Filter
Top Products
Black plate (23,1)
Buick Regal Owner Manual - 2011
Infotainment System 7-23
Accepting a Call
Turn the
Z knob to Answer and
press the
Z knob.
Declining a Call
Turn the
Z knob to Decline and
press the
Z knob.
Switching Between Calls
(Call Waiting Calls Only)
To switch between calls:
1. Press the
Z knob.
2. Select Switch Call from
the menu.
Conference Calling
Conference calling and three‐way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work.
To start a conference while in a
current call:
1. Press the
Z knob.
2. Select Enter Number.
3. Enter the character sequence
then select Call. See “Entering
a Character Sequence” in
Operation on page 7‑4 for more
information.
4. After the call has been placed,
press the
Z knob and select
Merge Calls.
5. To add more callers to the
conference call, repeat Steps 1
through 4. The number of callers
who can be added is limited by
your wireless service carrier.
Ending a Call
Press the Z knob and select
Hang Up.
Muting a Call
To Mute a Call
Press the
Z knob and select
Mute Call.
To Cancel Mute
Press the
Z knob and select
Mute Call.
Dual Tone Multi-Frequency
(DTMF) Tones
The in‐vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu‐driven
phone system.
1. Press the
Z knob and
select Enter Number.
2. Enter the character sequence;
see “Entering a Character
Sequence” in Operation on
page 7‑4 for more information.
Bluetooth (Voice
Recognition)
Pairing
A Bluetooth‐enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
the cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls can
be made using OnStar
®
Hands‐Free