Briggs & Stratton 120000 Automobile Parts User Manual


 
9
en
Specifications
Engine Specifications
Model 120000
Displacement 12.48 ci (205 cc)
Bore 2.688 in (68.28 mm)
Stroke 2.200 in (55.88 mm)
Oil Capacity 18 -- 20 oz (0.54 -- 0.59 L)
Gear Reduction Oil 80W-90
Engine Specifications
Model 200000
Displacement 18.63 ci (305 cc)
Bore 3.120 in (79.24 mm)
Stroke 2.438 in (61.93 mm)
Oil Capacity 26 -- 28 oz (0.77 -- 0.83 L)
Gear Reduction Oil SAE 30
Tune-up Specifications *
Model 120000
Spark Plug Gap 0.030 in (0.76 mm)
Spark Plug Torque 180 lb-in (20 Nm)
Armature Air Gap 0.010 - 0.014 in (0.25 - 0.36 mm)
Intake Valve Clearance 0.004 - 0.006 in (0.10 - 0.15 mm)
Exhaust Valve Clearance 0.009 - 0.011 in (0.23 - 0.28 mm)
Tune-up Specifications *
Model 200000
Spark Plug Gap 0.030 in (0.76 mm)
Spark Plug Torque 180 lb-in (20 Nm)
Armature Air Gap 0.008 - 0.012 in (0.20 - 0.30 mm)
Intake Valve Clearance 0.004 - 0.006 in (0.10 - 0.15 mm)
Exhaust Valve Clearance 0.009 - 0.011 in (0.22 - 0.28 mm)
* Engine power will decrease 3.5% for each 1,000 feet (300 meters) above sea level and 1% for each 10° F(5.6° C) above 77° F(25° C). The engine will operate satisfactorily at an
angle up to 15°. Refer to the equipment operator’s manual for safe allowable operating limits on slopes.
Common Service Parts n
Service Part Part Number
Flat Air Filter 491588, 5043
Flat Air Filter Pre-cleaner 493537, 5064
Fuel Filter 792917
Fuel Additive 5041, 5058
Service Part Part Number
Resistor Spark Plug 491055
Long Life Platinum Spark Plug 5066
Spark Plug Wrench 89838, 5023
Spark Tester 19368
n We recommend that you see any Briggs & Stratton Authorized Dealer for all maintenance and service of the engine and engine parts. Use only genuine Briggs & Stratton parts.