Filter
Top Products
Controls
115
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
You can also adjust the temperature in the
upper body region with iDrive.
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Open "Climate".
3. Select "Vent settings" and press the con-
troller.
4. Select the field by moving the controller and
turning the controller to adjust the temper-
ature.
Defrosting windows and removing
condensation
Quickly remove ice and condensa-
tion from the windshield and front
side windows.
To do this, also switch on the cooling function.
Rear window defroster
The rear window defroster
switches off after a while. Depend-
ing on the vehicle equipment,
upper wires are used as an antenna and are not
part of the rear window defroster.
Air volume, manual
You can adjust the air volume by
turning. You can reactivate the
automatic mode for the air volume
with the AUTO button.
The air quantity is reduced and if need be, the
ventilation is switched off in order to reduce the
load on the battery. The display stays the same.
Manual air distribution
You can route the air flowing out into the vehicle
interior via various programs, separately for the
driver's and passenger's side:
> Upper body region
> Upper body region and footwell
> Footwell
> Driver's side: windows and footwell
> Individual program
Selecting program
Press the button repeatedly until
the desired air distribution of the
respective program is shown on
the Control Display.
Adjusting air distribution individually –
individual program
Your settings are stored in this program.
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Open "Climate".
3. Select "Vent settings" and press the con-
troller.
The driver's and front passenger side can
be adjusted separately with the fields on the
right or left side.
4. Select the driver's or front passenger side
if necessary.
Move the controller to the right or left
repeatedly until the driver's or front passen-
ger side is selected.
5. Select the desired field by moving the con-
troller.
Online Edition for Part no. 01 41 2 600 310 - © 02/08 BMW AG