Filter
Top Products
TeleService, BMW Assist
156
6. Select "Enable services" and press the
controller.
TeleService and, if applicable, BMW
Assist is enabled; data exchange with
the service center starts.
Enabling takes a few minutes. The status is
displayed on the Control Display. If you
open another menu, the enable process
continues to run in the background.
These services are enabled.
Services offered
The following special aspects apply to the
services of TeleService and BMW Assist:
> The range of services offered is coun-
try-dependent
> Voice contact is established or data are
transferred in dependence on the
equipment and the country. In some
countries, both are possible
> The data that is transferred can be the
vehicle data, your current position or
the data of CBS Condition Based Ser-
vice.
Automatic service notification*
The data on the service status of your vehi-
cle or on legally mandated inspections is
transmitted automatically directly to your
BMW center prior to the due date. You can
check when the BMW center is notified.
Control Center, for principle details, refer to
page 16:
1. Open the start menu
2. Press the controller to open the menu
3. Select "Service" and press the control-
ler
4. Select "Service requirements" and
press the controller
5. Select "Service notification" and press
the controller.
Breakdown assistance
You can call Roadside Assistance* of the
BMW Group should you require help in the
event of a breakdown.
Control Center, for principle details, refer to
page 16:
1. Open the start menu
2. Press the controller to open the menu
3. Select "Service" and press the control-
ler
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG