Filter
Top Products
Destination guidance
118
Destination guidance
Starting destination
guidance
Control Center, for principle details, refer to
page 16:
1. Select "Navigation" and press the con-
troller
2. Select the destination from the destina-
tion list and press the controller or enter
a new destination, refer to page 110
3. Select "Start guidance" and press the
controller.
The destination guidance is started.
indicates the current destination.
After the route has been calculated, desti-
nation guidance is indicated by arrows or a
route map on the Control Display.
1 Estimated time of arrival
2 Distance to the destination on the cal-
culated route
3 Route criterion
4 Switch voice instructions on/off
During destination guidance, you can oper-
ate other equipment using the Control Cen-
ter at any time. You are informed of a
required change in direction by means of
voice instructions in good time prior to
every intersection.
To exit the menu:
Select and press the controller.
Terminating/continuing
destination guidance
Control Center, for principle details, refer to
page 16:
indicates the current destination.
1. Select the current destination and press
the controller
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG