Filter
Top Products
7. Laser Optical Sensors: collect Laser signals from in front and
behind.
8. Audio Alert Speaker: all audible alerts and Digital Voice
Messages are emitted from this location.
9. Power Jack: using the straight or coiled cord, EXPRESS 936
operates in any vehicle with a 13.8 volt
DC negative ground
system (l0.5 volt to 16 volt range).
Power-Up Test Sequence
Each time your detector is turned
ON, audio and Text Messages
for Laser, Ka, K, X and Safety Warning System
®
(sws
™
) are
presented. After this sequence, the status of Selectable
Features is displayed: “SWS on”, “SWS off”, “VG-2 on”,
“VG-2 off”, “SWSvoice”, “SWSclick”, ”VOICEon”,
“VOICEoff” (see page 9). If your unit displays information
other than this standard power-up test sequence, return it to
BELTRONICS for servicing. To bypass the power-up test
sequence, press the
P/V button during the Power up test
sequence.
Tutorial Mode
The tutorial mode allows you to become more familiar with
all audible and visual alerts. To engage this mode, press and
hold CTY, then press AUD while the unit is
OFF. The message
“TUTORIAL” appears in the display followed by the audio and
corresponding Text Message for “LASER”, “Ka AUDIO”, “K
AUDIO”, “X AUDIO”,”VG-2 Alert,” sample Radar alert (K
band signal ramping from weak to strong) and “SAFETY
WARNING SYSTEM SAMPLE ALERTS”. Three sample sws
™
messages are then presented in the display along with the
corresponding Digital Voice Message:
Sample 1 “ACCIDENT AHEAD”
Sample 2 “HIGHWAY WORKCREW AHEAD”
Sample 3 “POLICE IN PURSUIT”
Anytime during Tutorial Mode (except Safety Warning System
®
DESCRIPTION OF FEATURES
5