Filter
Top Products
To achieve optimum performance,regardless of which mounting
position you choose, follow the basic steps on the following page:
1. Consider occupant safety when selecting a mounting location.
Choose a location where the unit will not be hazardous in
case of an accident.
2. For optimum detection, position your unit with a clear,
unobstructed view of the road from the front and rear.
3. Do not allow the unit to make contact with the windshield.
This will eliminate unnecessary vibration.
4. Avoid placing your unit in direct sunlight. During the summer,
interior temperatures of an enclosed vehicle can sometimes
reach temperatures that will cause premature aging of the unit.
5. Your detector is not waterproof; exposure to water may cause
damage.
Dash Mounting
1. Select an area that is relatively level, clean and dry. Adhere the
soft portion of the enclosed hook and loop fastener to this area
and the corresponding hard portion to the bottom of your unit.
2. Fasten unit to dash by placing hook and loop pieces together.
Windshield Mounting
1. Remove the mounting cover on the top of the detector by pressing
on the raised dots and pushing outward.
2. Insert the “grooved” cover plate supplied until it locks into place.
3. Clean the desired area of the windshield, and adhere the
windshield/visor bracket by pressing on the suction cups.
11