Filter
Top Products
7. Laser Optical Sensors: collect Laser signals from in front and
behind.
8. Audio Alert Speaker: all audible alerts and Digital Voice
Messages are emitted from this location.
9. Power Jack: using the straight or coiled cord,
bel 980 or bel 950 operate in any vehicle with a 13.8 volt dc
negative ground system (10.5 volt to 16 volt range).
Note: Model 980 is the same as Model 950 except for the
addition of these features: Signal Strength Digit,City All Mode,
X/K/Ka Band On/Off, 9 audio level settings,Travel Case,
4' straight power cord and 2 year warranty.
description of features
Power-Up Test Sequence/Start-up Mode
Each time your detector is turned on,bel 980 or bel 950
will perform a power-up test sequence based upon the Start-Up
mode selected.There are three Start-Up modes of operation
plus a Tutorial mode.Release the pwr button at your chosen
selection.
Note—Pressing pwr at any time during start-up will bypass
the sequence.
NORMAL (Factory pre-set Mode)
Presents Audio and Text Messages for Laser,Ka,K,X and
Safety Warning System® (sws
™
). After this sequence,the
status of Selectable Features is displayed:
“CITY X” or “CITYALL”; “X/K/KA o n /o f f”; “Amute
“Amute o ff
”; “R/LVo i c e , “R/L t o n e ”;“SWS o n”,
“SWS o f f”; “SWSv o ic e ”, “SWStone”; “SCROLfa s t ”,
“SCROLslow”. Unit is now ready for operation.
Note: City X, City All and X/K/Ka On/off do not appear on model 950
MODS (Modifications Mode)
Presents Audio and Text Messages for Laser,Ka,K,X and Safety
Warning System® (sws
™
),followed by the presentation of Selectable
Features as chosen by the user.Unit is ready for operation.
on ,